New

• D-sub connectors, D-sub miniature connectors 2023-06-12

  D-sub connectors, D-sub miniature connectors: They are subminiature, D-shaped, connectors named after their shape. The typical applications of the D-Sub interface are VGA (DA15 female connector), parallel port (DB25 female connector), and COM serial port (DE9 male connector, RS232). Their screw-on design allows for high reliability. Although an old interface, they are still very common.

• What are the orientation options for connectors? 2023-06-11

  What are the orientation options for connectors? PCB orientation is the relative position of two PCBs to be connected by BTB connectors. Here are some of the common orientations of BTB connectors: In order to cater various PCB orientations (Parallel, Horizontal, Perpendicular), board-to-board connectors have been developed in straight, right angle and U-shaped designs. How do we stack PCBs? Amid the trends of miniaturization, transitioning to light weight and high speed, designers often face many constraints, both mechanically, and electrically. Greenconn offers various solutions to accommodate all stacking options. Vertical - Parallel, Mezzanine - Both connectors are in a vertical orientation. This allows a PCB to be stacked on top of another, minimizing the surface area as a result. Horizontal - 180 Degree, Coplanar, Edge-to-Edge - Both connectors are in a horizontal orientation. From the design standpoint, this keeps the mating centerline low profile to the PCBs. Perpendicular - Motherboard to Daughterboard - Connectors are perpendicular to one another. This is commonly seen in hard drive applications where many "Daughterboards" are stacked onto one motherboard, allowing the data storage space to be efficiently expanded. Here are some advantages of stacking PCBs: The design can be modularized into smaller PCBs and the PCBs can be connected using BTB connectors later on during assembly. This not only improves the design process but also allo

• What is IC and component socket:? 2023-06-10

  IC and component socket: These include the sockets that are used for connecting plug-in ICs. There are 23 specifications of commonly used IC sockets, which are also then divided into square hole IC sockets and round IC sockets.

• What is Memory connectors? 2023-06-09

  Memory connectors: The term refers to an interface used for connecting memory devices, which could be classified based on its individual uses, as was shown below. (1) SATA: The abbreviation of Serial ATA (Advanced Technology Attachment, another name of the first-generation IDE), a hard disk interface that replaces PATA, which is divided into 2 parts: signal (7 wires) and power supply (15 wires). (2) SAS: The abbreviation of Serial Attached SCSI, compatible with SATA. (3) SCSI: Small Computer System Interface, which has developed to the sixth generation, with 25 pins, 50 pins, 68 pins, or 80 pins, arranged in 2 rows or 3 rows, and there are many interface forms. (4) E-SATA: External SATA, which is an extended specification of SATA, used for connecting external devices, with 7 wires, and it is fool-proof via thickness and groove. (5) NGFF: Next Generation Form Factor, which has two kinds of interface, M-key, i.e., the former name of M.2 interface (PCI-E 4x channel) and B-key (SATA or PCI-E 2x channel). (6) VHDCI: Very High Density Connector Interface, which is a kind of SCSI connector. (7) IEEE-1394: Also known as firewire, with a serial interface, and 6 pins or 4 pins. (8) M.2: i.e. NGFF, an interface customized for ultrabooks, which replaces mSATA, and is compatible with many protocols, such as SATA

• What is Modular/Ethernet connectors? 2023-06-09

  Modular/Ethernet connectors: Commonly known as Ethernet, the connectors were used to connect network devices. The common Ethernet interface types are RJ-45 interface, RJ-11 interface, SC fiber interface, FDDI interface, AUI interface, BNC interface, and Console interface.

• What is Photovoltaic/Solar connectors? 2023-06-08

  Photovoltaic/Solar connectors: An interface used for connecting multiple solar cell modules, subject to special electrical requirements; the common MC series, MC3, and MC4, are fast connectors designed based on Multi-Contact. Y-shaped or one-to-multiple interfaces are used to connect multiple modules.

• What is Power connectors? 2023-06-07

  Power connectors: An interface used for connecting power supply, usually composed of plug and socket, and it cannot be strictly distinguished from headers and wire housings for being classified by function. The connectors can be classified by the properties of power supply, such as the magnitude of current, AC/DC, and appearance.

• What is RF coaxial connectors? 2023-06-06

  RF coaxial connectors: A coaxial connector refers to a part used to connect the ends of two shafts, ensuring that the centerlines of the two shafts are on the same axis; the usually shielded wire is made in the mode of coaxial wire. Shielded coaxial wire can be used to transmit RF signals. (1) SMA: Small A type; thread locking type; two forms: external thread + hole/internal thread + pin; or RP-SMA external thread + pin/internal thread + hole in reverse. The common impedance is 50Ω; the frequency is 0-18GHz. (2) SMB: Small B type, the common impedance is 75Ω; different in appearance and hole diameter; it is of the push-in locking type (3) SMC: Small C type, thread locking type, different in appearance and hole diameter; (4) BNC: Bayonet nut connector; it is of the bayonet type, it can be connected and detached quickly, and the frequency is 0-4Ghz (5) TNC: A variant of BNC, which adopts threaded connection, and the frequency range is 0-11Ghz (6) N-type: Invented by Neill, thread locking type, the appearance is 20-25mm, the frequency range is 0-11Ghz and the precision up to 18GHz (7) DIN type: DIN standard connector, also known as 7/16 or L29, large threaded connection, the appearance is 30-35mm, usually it is water-proof, and the frequency range is 0-11Ghz (8) MCX: Miniature coaxial, push-in connec

• What is Terminal block? 2023-06-05

  Terminal block: To facilitate wire connection, it usually refers to a female socket, i.e., an interface to which wires can be connected, and it can also be called a terminal block. It can be classified in many ways; such as plugging type, fence type, track type, spring type, and through-wall type.

• What is USB connectors? 2023-06-04

  USB connectors: The ever-present USB connector. This industry-standard connector can come in a variety of different types and stack-up options. Although using the latest USB-C comes with the benefit and compactness,

• Visit Frankfurt Auto parts Show 2023-02-18

  At the beginning of 2023, Antenk is full of energy, and the whole electronics industry is also showing vitality. On February 16, Antenk colleagues visited the Frankfurt Auto Parts Show with great enthusiasm and shared the new automible connector products at the show.

• DIN41612 connector common sense 2023-02-09

  DIN41612 connector, also known as European socket connector. It is a type of connector that adopts European standards and is widely used, usually used in chassis. During its installation, positioning accuracy, installation firmness, and replaceability are crucial.The positioning accuracy can ensure that the connector is accurately connected when the circuit board is loaded into the chassis; the installation firmness is used to ensure that the connector does not fall off or shift when the circuit board is pulled out and inserted; the replaceability is used when the same chassis is connected to the upper part. When the device needs to be disassembled or replaced, it can be operated conveniently and quickly. DIN41612 connectors mainly have parallel connection and vertical connection. The connection form is: straight hole - curved needle, vertical connection of curved hole - straight needle, parallel connection of curved hole - curved needle. The number of contact points are: 20, 30, 32, 40, 64, 96, 120, 128, 160, etc. The products are used in the connection between the backplane and the daughter board of optoelectronic equipment, the connection between the backplane and the daughter board of industrial control equipment, the industrial control of consumer electronics, the connection between the backplane and the daughter board of industrial control security control, etc. Its application industry: used in consumer electronics, monitors, computers, PCB boards, instrumentation, intelligent robots, electrical appliances, new energy vehicles, color TVs, air conditioners, photovoltaics, security, mobile phone industry, CNC and other industries!

• Antenk connector beginning wrok of the New Year 2023 2023-02-06

  Antenk Electronics Co., Ltd resume to work on 2023/01/30 from Spring Festival holiday, every Antenk present member has got a bonus. We shared our own delicious food from different hometown each other, also told the most touching thing during vacation. Wish all of Antenk good health, all the best, smooth work, happy life in the New Year 2023! Also wish our Ante

• Important customers visit our factory 2022-12-15

  Important customers come to our factory to visit and guide our work last week, and focus on our car connector research and development and mold injection molding process ability, thank you for your trusting and choosing us, all the way forward

• Introduction of scsi 2022-08-01

  SCSI is a once popular type of connection used for storage and other devices in PCs. The term refers to the cables and ports used to connect some types of hard drives, optical drives, scanners, and other peripherals to your computer. The SCSI standard is no longer common in consumer hardware devices, but you will still find it used in some commercial and enterprise server environments. Newer versions include USB Attached SCSI (UAS) and Serial Attached SCSI (SAS). Most computer manufacturers have stopped using onboard SCSI entirely and have used more popular standards such as USB and FireWire to connect external devices to the computer. USB is faster, with a maximum incoming speed approaching 40 Gbps. Adaptec 2248700-R U320 PCI Express X1 1-lane SCSI host bus adapter Adaptec SCSI host adapter. PMC-Sierra, Inc. SCSI is based on an older interface called the Shugart Associates System Interface (SASI), which later evolved into the Small Computer System Interface, abbreviated SCSI and pronounced "scuzzy". How does SCSI work? A SCSI interface used inside a computer to connect different types of hardware devices directly to the motherboard or storage controller card. When used internally, the devices are connected via ribbon cables. External connections are also common, usually using cables through external ports on the storage controller card. Inside the controller is a memory chip that stores the SCSI BIOS, an integrated software used to control connected devices.

• Knowledge about plating of connectors 2022-05-09

  Electronic connectors are an emerging electronic product industry. Since their birth, they have developed rapidly and have become an important electronic product industry. The products include RF coaxial connectors, EPT European connectors, optical fiber connectors, DRAWER connectors, and local broadcasting. Connectors, household appliances connectors, PC connectors, network connectors, microelectronic device connectors, explosion-proof electrical connectors, etc. In short, wherever there are electronic products, there must be connectors. So what is the connector for? As the name suggests, it is used for electrical connection. Without connectors, the functions of electronic products cannot be exerted, and the flow of energy, electrons, and information cannot be circulated and transmitted. Our most common connectors are all kinds of plugs, sockets and various cables on the computer at home. Obviously, without these cables, all home appliances and computers cannot work, which shows the importance of connectors. Like the electroplating of microwave devices, connector electroplating requires a large amount of precious metal electroplating solution. Therefore, saving precious metal resources is also an important issue faced by connector electroplating. The reason for putting this content in this chapter is that pulse electroplating is first and foremost used in precious metal electroplating, and connector electroplating happens to be an area where precious metal electroplating is more widely used. In the electroplating of connectors, due to the high electrical performance requirements of the contact pair, the gold plating process occupies an obvious important position in the electroplating of the connectors. At present, except for some strip connectors that use the selective gold plati