Right Angle Smt Headers

1.27mm Pin Header Dual/Double Row Angle SMT

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHCM09-XXD-ABXX

Product Overview Pin Headers Pin headers (male) and female headers (socket) are used as a set. A male pin header consists of one or more rows of metal pins molded into a plastic base. Due to their simplicity, male pin headers are the most cost-effective. Headers are a simple connector that can be used in a wide...

Contact Now

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon

• Min. Order: 1000 Piece/Pieces
• Model No.: HPCNR-FXXXX

Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact...

Contact Now

2.54mm(.100") Pitch Dual Row Box/Shrouded Headers DIP 90° type H=9.0

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDR01-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

1.27mm Pin Header Dual Row Angle SMT Type

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHCM16-XXD

A pin header is a connector that consists of a row of pins or sockets that are used to connect electronic components or devices together. It is typically a rectangular plastic block with one or more rows of metal pins or sockets that protrude from one or both sides of the block. Pin headers are commonly used on...

Contact Now

2.54mm Ejector Header Solder Angle Through Hole with Lever

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR05-XXXXXX

0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm Dual Row Shrouded Box Header DIP 180° type H=13.60mm

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS03-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

0.8mm(.031") Pin Header Strip Connector Dual Row THT Right Angle/90 deg

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHAR01-XXD

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

2.0mm Single Row Angle Pin Strip Headers

• Min. Order: 1 Piece/Pieces
• Model No.: PHDR01-XXS

2.0 mm Pin Strip Headers Single Row DIP Angle Type PHDR01-XXS SPECIFICATION Current Rating: 1.5 Amp Insulation Resistance: 1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C Contact Material: Brass Insulator Material: PA6T,UL 94V-0 Black

Contact Now

2.54mm Single Row Angle standard shape Pin Header Board to Board Connectors

• Model No.: PHER01-XXS-A

Product Introduction 2.54mm Pitch Pin header Connector, with one to four rows of 2 to 80 pins. Available in custom length and pitch. Pins can be configured as straight pin, right angle pin and SMT pin. Packing options include bag, tube, and reel packing, Plating options: gold flash, tin plating. These connectors are...

Contact Now

1.27*2.54mm Shrounded Box Header Straight SMT H=5.90

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHBM01-XXXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

2.0x2.0mm Shrouded Box Header Vertical /Straight SMT Type H=6.1mm

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCM04-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now