HuiZhou Antenk Electronics Co., LTD

Receptacle Headers Right Angle

- manufacturer, factory, supplier from China

(Total 12 Products for Receptacle Headers Right Angle)

  • 96P Right Angle Female/Receptacles/Sockets Type R DIN41612 Connectors

    96P Right Angle Female/Receptacles/Sockets Type R DIN41612 Connectors

    • Packaging: bag
    • Supply Ability: 1,000,000PCS/month
    • Min. Order: 1000 Piece/Pieces
    • Model No.: DFR-XX-XXX-304

    DIN41612 Right Angle Female Type R Connectors 96P Product introduction Before the product is launched, the 3D model is simulated and optimized by simulation software such as ABAQUS to ensure that my accuracy and safety are in the best state. The rubber core is composed of high-performance engineering plastics, with...

    Contact Now

  • 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon

    1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon

    • Min. Order: 1000 Piece/Pieces
    • Model No.: HPCNR-FXXXX

    Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact...

    Contact Now

  • Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

    Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

    • Packaging: bag
    • Supply Ability: 1,000,000PCS/month
    • Min. Order: 1000 Piece/Pieces
    • Model No.: DMR-XX-XXX-213-F

    DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

    Contact Now

  • 2.54mm Dual Row Shrouded Box Header DIP 180° type H=13.60mm

    2.54mm Dual Row Shrouded Box Header DIP 180° type H=13.60mm

    • Packaging: tape & reel packing
    • Min. Order: 1000 Piece/Pieces
    • Model No.: BHDS03-XXXXX

    Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

    Contact Now

  • 2.54mm(.100") Pitch Dual Row Box/Shrouded Headers DIP 90° type H=9.0

    2.54mm(.100") Pitch Dual Row Box/Shrouded Headers DIP 90° type H=9.0

    • Packaging: tape & reel packing
    • Min. Order: 1000 Piece/Pieces
    • Model No.: BHDR01-XXXXX

    Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

    Contact Now

  • 0.8mm(.031") Pin Header Strip Connector Dual Row THT Right Angle/90 deg

    0.8mm(.031") Pin Header Strip Connector Dual Row THT Right Angle/90 deg

    • Packaging: Tray/Reel/Bag
    • Min. Order: 500 Piece/Pieces
    • Model No.: PHAR01-XXD

    Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

    Contact Now

  • 1.27mm Pin Header Dual/Double Row Angle SMT

    1.27mm Pin Header Dual/Double Row Angle SMT

    • Packaging: Tray/Reel/Bag
    • Min. Order: 500 Piece/Pieces
    • Model No.: PHCM09-XXD-ABXX

    Product Overview Pin Headers Pin headers (male) and female headers (socket) are used as a set. A male pin header consists of one or more rows of metal pins molded into a plastic base. Due to their simplicity, male pin headers are the most cost-effective. Headers are a simple connector that can be used in a wide...

    Contact Now

  • 1.27mm Pin Header Dual Row Angle SMT Type

    1.27mm Pin Header Dual Row Angle SMT Type

    • Packaging: Tray/Reel/Bag
    • Min. Order: 500 Piece/Pieces
    • Model No.: PHCM16-XXD

    A pin header is a connector that consists of a row of pins or sockets that are used to connect electronic components or devices together. It is typically a rectangular plastic block with one or more rows of metal pins or sockets that protrude from one or both sides of the block. Pin headers are commonly used on...

    Contact Now

  • 2.0mm Single Row Angle Pin Strip Headers

    2.0mm Single Row Angle Pin Strip Headers

    • Min. Order: 1 Piece/Pieces
    • Model No.: PHDR01-XXS

    2.0 mm Pin Strip Headers Single Row DIP Angle Type PHDR01-XXS SPECIFICATION Current Rating: 1.5 Amp Insulation Resistance: 1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C Contact Material: Brass Insulator Material: PA6T,UL 94V-0 Black

    Contact Now

  • 2.54mm Single Row Angle standard shape Pin Header Board to Board Connectors

    2.54mm Single Row Angle standard shape Pin Header Board to Board Connectors

    • Model No.: PHER01-XXS-A

    Product Introduction 2.54mm Pitch Pin header Connector, with one to four rows of 2 to 80 pins. Available in custom length and pitch. Pins can be configured as straight pin, right angle pin and SMT pin. Packing options include bag, tube, and reel packing, Plating options: gold flash, tin plating. These connectors are...

    Contact Now

  • 2.54mm Ejector Header Solder Angle Through Hole with Lever

    2.54mm Ejector Header Solder Angle Through Hole with Lever

    • Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
    • Min. Order: 1000 Piece/Pieces
    • Model No.: LHDR05-XXXXXX

    0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

    Contact Now

  • 10pin Right Angle Plug DIN41612 Connectors

    10pin Right Angle Plug DIN41612 Connectors

    • Packaging: bag
    • Supply Ability: 1,000,000PCS/month
    • Min. Order: 1000 Piece/Pieces
    • Model No.: DMR-XXXX-210

    DIN 41612/IEC 60603-2 Electronics Connectors/Backplane Connectors Product introduction There are 2A, 6A, 15A, etc., signal type, power type and mixed type of different media, the product has a wide range of applications. There are four installation forms of backplane, parallel board, common panel, and wire-to-board,...

    Contact Now

  • Video
  • 96P Right Angle Female/Receptacles/Sockets Type R DIN41612 Connectors
  • Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors
  • 10pin Right Angle Plug DIN41612 Connectors
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Receptacle Headers Right Angle

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send