Ph2 54 Ejector Header

2.00mm(.079") Pitch Shrouded PCB Box Header through-hole/THT 90° H=6.40

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCR02-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

2.54mm (.100") Pitch Ejector Header Dual Row Straight DIP with lever

• Model No.: LHDS04-XXXXXXX

Box header/ ejector header connector, With stright, SMT,Right angle, 2.54pitch, 2.0pitch, 1.27pitch, The commonly used Pin ways have 6P,8P,10P,14P,16P,20P, 24P,26P,30P,34P, 40P,50P,64P. Box header/ ejector header and IDC flat cable connectors are two of the most commonly used connectors. Box headers can be found in...

Contact Now

PH2.54mm (.100") Single Row Double Plastic Right Angle DIP 90° Pin Header PCB Connector

• Min. Order: 1 Piece/Pieces
• Model No.: PHER02-XXS

PH2.54mm (.100") Single Row Double Plastic Right Angle DIP/Through Hole 90° Pin Header PCB Connector SPECIFICATION Connector Category: Board to Board Connectors丨PC Board Connectors丨Pin Header丨0.8mm Pin Header丨1.0mm Pin Header丨1.27mm Pin Header丨1.5mm Pin Header丨20.mm Pin Header丨2.2mm Pin Header丨2.54mm Pin Header丨3.0mm...

Contact Now

2.54mm Dual Row Box Header Connector DIP Vertical 180° type H=9.00mm

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS09-XXXXX

The simple box header is generally composed of a square plastic socket and a number of square pins arranged in neat rows. What distinguishes the simple box header from the ordinary box header is that the clips on both sides originally used for fixing, namely the "horn", are removed. The fixed function is lost....

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

2.54mm Ejector Header 90° w Metal Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR03-XXXXXX

Connector Catogory: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to...

Contact Now

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

1.27*1.27MM Box Header With Key,SMT H=2.54MM

• Packaging: Tape&Reel+CAP
• Min. Order: 500 Piece/Pieces
• Model No.: BHAM07-XG0BBW

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

1.27*1.27MM Shrouded Box Header Vertical with the key,180°H=2.54MM

• Packaging: Tape&Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHAS05-XXXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

1.27x 2.54mm Box Header DIP 180 degree type,H=5.4mm

• Packaging: Tape & Reel
• Min. Order: 1000 Piece/Pieces
• Model No.: BHBS01-XXXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now