Male Box Header 2 54mm

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

1.27x2.54mm IDC flat cable DIP plug connector Four Row Foot

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDBS02-XXXX

1.27x2.54mm IDC flat cable headers section DIP plug connector four row foot Product specification Current Rating: 1. 0Amp Insulation Resi stance: 1000MQ min Contact Resistance: 20mQ max Withstand Voltage: 500V AC/DC Contact Material: Au or Sn Over Ni Insulator Material: PBT+30%GF UL 94V- 0

Contact Now

2.54x2.54mm Dual RowShrouded Male Box Header THT 180° type H=9.0

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS01-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

2.54mm dual row box header Through Hold 180° type H=9.0 Add Housing

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS05-XXXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

2.54mm(.100") Pitch Dual Row Box/Shrouded Headers DIP 90° type H=9.0

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDR01-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

2.54mm dual row box header DIP Right Angel 90° type H=13.60mm

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDR02-XXXXX

The simple box header is generally composed of a square plastic socket and a number of square pins arranged in neat rows. What distinguishes the simple box header from the ordinary box header is that the clips on both sides originally used for fixing, namely the "horn", are removed. The fixed function is lost....

Contact Now

2.54mm IDC Cable Mounted Box Headers With Mounting Ears

• Min. Order: 1 Piece/Pieces
• Model No.: BHDI01-XXXXX

Box Header Overview: Box headers or shrouded headers are pin headers that feature a plastic guide box or shroud surrounding the pins. This plastic box helps to prevent damage to the pins when it has yet to be mated and provides for an easier mating process of the connectors. Box headers are offered with keying and...

Contact Now

2.54mm (0.1") dual row Pin (Male) Box Header SMT with Post

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDM04-XXXXX

• The simple box header consists of square plastic socket and square needles arranged orderly. The difference • between the connector and the simple box header is that the simple box header will remove the snapshot packets on both sides. • According to the requirements, the peripheral dimensions of small connectors...

Contact Now

1.27*2.54mm 2 Rows Male/Pin Ejector Header Connector DIP/THT 90° Right Angle

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

1.27*2.54mm ejector header 90° type four row foot

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR02-XXXXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 1.27*2.54mm ejector header 90° type four row foot SPECIFICATION Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to...

Contact Now

1.27*2.54mm Male Ejector Header Connector DIP Straight /180 Degree

• Min. Order: 1 Piece/Pieces
• Model No.: LHBS02-XXXXX

Product Description Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 1.27*2.54mm rstraight type Ejector Header Connector SPECIFICATION Current Rating: 1.0Amp Insulation Resistance:1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating...

Contact Now

2.54*2.54mm(0.100") 2 Rows Male Ejector Header Connector DIP 180°

• Model No.: LHDS01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now