Machined Pin Header

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

160 Positions Straight type E Solder Male

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XXXX-504

Product introduction The connector conforms tot he DIN 41612 standard - DIN is the Deutsches Institut für Normung i.e. the German Institute for Standardisation. In view of the popularity of the connector and its worldwide usage, the standard has been adopted by other bodies and may be referred to as IEC 60603-2 and EN...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.00mm (0.079") Pitch Female Pin Header Connector Single Row Straight Prevent Tin

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: FHDS03-XXSXXX

2.00mm (0.079”) Pitch Female Pin Header Connector Single Row Straight Prevent Tin Product specification Connector Category: Female Header丨0.8mm Female Header丨1.0mm Female Header丨1.27mm Female Header丨1.5mm Female Header丨20.mm Female Header丨2.2mm Female Header丨2.54mm Female Header丨3.0mm Female Header丨3.96mm Female...

Contact Now

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: BHAR01-XXXX

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand...

Contact Now

1.50mm(0.059") Pitch Single Row DIP 180°/Straight Male Pin Strip Headers

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Supply Ability: 100000000pcs/month
• Min. Order: 1000 Piece/Pieces
• Model No.: PHJS01-XXSXXXX

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

1.50mm(0.059") Pitch Pin Header Straight Type Double Row

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: PHJS01-XXDXXXX

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

2.54mm (0.1") dual row Pin (Male) Box Header SMT with Post

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDM04-XXXXX

• The simple box header consists of square plastic socket and square needles arranged orderly. The difference • between the connector and the simple box header is that the simple box header will remove the snapshot packets on both sides. • According to the requirements, the peripheral dimensions of small connectors...

Contact Now

1.27*2.54mm 2 Rows Male/Pin Ejector Header Connector DIP/THT 90° Right Angle

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

0.8mm Pin Header Dual Row Angle SMT

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHAR02-XXD

0.8 mm Male Pin Header Dual Row Angle SMT Type PHAR02-XXD 0.8mm(0.03") Pitch Dual Row right angle pin header SMT Type SPECIFICATIONS: Product Name 0.8mm Pin Header, R/A, 2 Row, SMT 0.80mm Pin Header Dual Row SMT connector 0.80mm Pin Header, double row, SMT,Horizontal PCB Header Connector Product Category: Board to...

Contact Now

0.8mm(.031") Pin Header Strip Connector Dual Row THT Right Angle/90 deg

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHAR01-XXD

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

0.8mm SMT Pin Header Dual Row Plastic

• Model No.: PHAM02-XXD

0.8 mm Pin Header Dual Row Double Plastic SMT Type PHAM02-XXD SPECIFICATIONS: Product Name 0.8mm Pitch Pin Header 180° SMT Dual Row Double Plastic SMT Pin Header, Dual Row, Double Plastic, Vertical 0.80mm Pin Header, double row, SMT,Vertical PCB Header Connector Part#: PHAM02-XXD-ACW-XXX Product Category: Board to...

Contact Now