Latch Header Connector

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

1.27*2.54mm ejector header 90° type four row foot

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR02-XXXXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 1.27*2.54mm ejector header 90° type four row foot SPECIFICATION Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to...

Contact Now

2.54mm (0.100")Pitch​ Latch Eject Header SMT 180°

• Packaging: Tray/Bag/Tube/Reel
• Min. Order: 500 Piece/Pieces
• Model No.: LHDM01

Product Introduction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.54mmx2.54mm Latch Header 2X5P straight Dip=3.3mm

• Model No.: LHDS06-X-X-X-X-X

What is an Ejector header? Cow horn connector is one of many connector types. It is not only a European connector, but also a variety of connectors classified according to actual use conditions. It is called a cow horn connector because its shape is similar to the cow horn. The cow horn connector is a very simple...

Contact Now

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

56 Pin Vertical Male Type C DIN 41612 / IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-505

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

128 Pin Vertical Male Type C Eurocard DIN41612 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-508

Product introduction The connectors have contacts arranged in rows, typically one two or three, with two and three being the most common. These rows are labelled, a, b, and c, for example a pin may be numbered 21a, or 22b, etc., dependent upon the position and the row. Typically the rows have 16 or 32 contacts per row...

Contact Now

160 Positions Straight type E Solder Male

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XXXX-504

Product introduction The connector conforms tot he DIN 41612 standard - DIN is the Deutsches Institut für Normung i.e. the German Institute for Standardisation. In view of the popularity of the connector and its worldwide usage, the standard has been adopted by other bodies and may be referred to as IEC 60603-2 and EN...

Contact Now

DIN41612 Type 0.33Q Connectors-Inversed 10 Positions

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFR-XX-XXX-222

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

44 Positions Vertical Plug Inversed eurocard connectors per din 41612 and iec 60603-2

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-213

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

DIN 41612 / IEC 60603-2 Connectors Vertical Plug/Male Inverse/Inverted 20 Positions

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-217

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now