Idc Ejector Header

2.54mm/.100" Ejector Header IDC Type With Mounting Ears

• Packaging: TRAY/BAG/TUBE/REEL
• Min. Order: 500 Piece/Pieces
• Model No.: LHDI01

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.54mm IDC Ejector Header Connector Without Mounting Ears

• Min. Order: 1 Piece/Pieces
• Model No.: LHDI02

PCB Board A. Tolerances Maximum allowable bow of the pc board will be 0.13 mm [.005 in.] over the length of the header. B. Material and Thickness The pc board material must be glass epoxy (FR--4 or G--10). The minimum pc board thickness must be 2.03 mm [.080 in.]. Headers are available with post lengths of 4.42 mm...

Contact Now

DIN41612 Vertcal Female Type IDC Connector 64 Position

• Brand: ATKCONN
• Packaging: Tray or Custom
• Supply Ability: 1000000/Month
• Min. Order: 3000 Piece/Pieces

DIN41612 Vertcal Female Type IDC Connector 64 Position Product introduction DIN41612 connector, also known as European socket connector. It is a type of connector that adopts European standards and is widely used, usually used in chassis. During its installation, positioning accuracy, installation firmness, and...

Contact Now

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: BHAR01-XXXX

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand...

Contact Now

1.27mm IDC Flat Cable Header DIP plug Connector(terminated height 7.0)

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDAS02-XXXX

IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation,...

Contact Now

2.54mm IDC Cable Mounted Box Headers With Mounting Ears

• Min. Order: 1 Piece/Pieces
• Model No.: BHDI01-XXXXX

Box Header Overview: Box headers or shrouded headers are pin headers that feature a plastic guide box or shroud surrounding the pins. This plastic box helps to prevent damage to the pins when it has yet to be mated and provides for an easier mating process of the connectors. Box headers are offered with keying and...

Contact Now

2.54mm IDC Box Header dual row w/o Ears

• Packaging: tube
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDI02-XXXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

2.54mm Ejector Header 90° w Metal Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR03-XXXXXX

Connector Catogory: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to...

Contact Now

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now