Ejector Header Straight Type

1.27*2.54mm Dual Row Latch/Ejector Header DIP 180° type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBS01-XXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

1.27mm(.050") Pitch Dual Latch Ejector Header 90° DIP type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAR01-XXXXX

Product Overview: Ejector headers are usually made of head shaped plastic and square needles similar to animal cattle. The difference of the ejector connector is that the simple ejector has more clips on both sides. According to the requirements, the external dimensions of the ejector connector commonly include 1.27...

Contact Now

1.27mm(.050") Dual Row Shrouded Header With Ejector Straight DIP Type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAS01-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

1.27*2.54mm 2 Rows Ejector Header Connector SMT Vertical type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBM01-XXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of pins, it can be divided into 1.27mm pitch horn connector, 2.0mm pitch horn connector...

Contact Now

1.27*2.54mm ejector header 90° type four row foot

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR02-XXXXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 1.27*2.54mm ejector header 90° type four row foot SPECIFICATION Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to...

Contact Now

2.0 x 2.0mm Dual Row Latch/Ejector Header SMT 180°

• Packaging: tray
• Min. Order: 1000 Piece/Pieces
• Model No.: LHCM01-XXXXXX

How to install the ejector header? Ejector header is widely used in electronic field. Therefore, most equipment assembly personnel will face the problem of how to install the ejector header. In fact, we only need to grasp three points. 1 Insertion direction. When the ejector header is fully inserted to U=14.2, it...

Contact Now

2.00mm Pitch Dual Row Ejector Header DIP 180°

• Min. Order: 1 Piece/Pieces
• Model No.: LHCS01-XXXXXX

Structure • Simple ejector header usually consists of four square plastic sockets and several neatly arranged guidelines. The difference between a box header and an ejector header is that the box header removes the buttons on both sides. • As required, there are generally three specifications of box header: 1.27...

Contact Now

2.54mm/.100" Ejector Header IDC Type With Mounting Ears

• Packaging: TRAY/BAG/TUBE/REEL
• Min. Order: 500 Piece/Pieces
• Model No.: LHDI01

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

56 Pin Vertical Male Type C DIN 41612 / IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-505

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

128 Pin Vertical Male Type C Eurocard DIN41612 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-508

Product introduction The connectors have contacts arranged in rows, typically one two or three, with two and three being the most common. These rows are labelled, a, b, and c, for example a pin may be numbered 21a, or 22b, etc., dependent upon the position and the row. Typically the rows have 16 or 32 contacts per row...

Contact Now

2.00mm(.079") PCB DIP Type Single Row Female Header

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: FHDS02-XXSXXX

Product Specification 2.0mm (0.079”) Pitch Female Headers 2.00 mm pitch female sockets/headers are low-profile connectors designed for signal and low power PC board connections when space is at a premium. Options include through-hole, surface mount and can be customized for mixed technology, press-fit and pass-through...

Contact Now