Dip Plug Idc Connector

1.27mmx2.54mm IDC Flat Cable Connector DIP Plug Connector (terminated height 5.1)

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDBS01-XXXXX

IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation,...

Contact Now

2.54mm Dual-in-line Right Angle DIP/DIL Socket Connectors

• Packaging: Tray, Tube, Bag and Tape Reel
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFER01-XXXXX

DIL Sockets Overview DIL sockets (dual in-line sockets) are integrated circuit components used in almost all modern electronic devices. They have two parallel rows of pins set in a rectangular housing. The sockets have different numbers of pins to match the target integrated circuit. DIL sockets are embedded in a...

Contact Now

2.54mm Dual-in-line Integrated Circuit (IC) Sockets Connector Straight DIP(H=3 L=7.4)

• Model No.: MIFES03-XXXX

Connector Category:IC SOCKET & Machined SOCKET丨Machined Pin Header丨 Machined Female Header丨 IC SOCKET丨Pin Grid Array Sockets丨丨PLCC SOCKET丨 2.54mm Dual-in-line Socket Straight DIP(H=3 L=7.4) The function of the IC socket is to facilitate the insertion of the IC card. A multi pin integrated circuit is called an IC....

Contact Now

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: BHAR01-XXXX

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand...

Contact Now

1.27mm IDC Flat Cable Header DIP plug Connector(terminated height 7.0)

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDAS02-XXXX

IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation,...

Contact Now

1.27x2.54mm IDC flat cable DIP plug connector Four Row Foot

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDBS02-XXXX

1.27x2.54mm IDC flat cable headers section DIP plug connector four row foot Product specification Current Rating: 1. 0Amp Insulation Resi stance: 1000MQ min Contact Resistance: 20mQ max Withstand Voltage: 500V AC/DC Contact Material: Au or Sn Over Ni Insulator Material: PBT+30%GF UL 94V- 0

Contact Now

1.50mm(0.059") Pitch Pin Header Straight Type Double Row

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: PHJS01-XXDXXXX

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

CR2450 lithium coin cell Holders DIP/THM Battery Connector

• Packaging: Tape & reel packing
• Min. Order: 500 Piece/Pieces
• Model No.: BT-S-SN-R-CR2450D

Product Category: Battery Holders丨Battery Mounts丨 Coin Cell Holders丨 Battery Contacts丨Battery Retainers丨Battery Clips 丨Battery Snaps丨SMD/SMT Coin Cell Battery Holders 丨Button Battery Holder Case Box Case Coin Battery Holder・Coin Cell Holder・Button Cell Holder (CR498・...

Contact Now

2.0 x 2.0mm Box Header Connector DIP 180° H=5.75

• Min. Order: 1 Piece/Pieces
• Model No.: BHCS01-XXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

2.00mm Box Header 180° H=6.40mm Connector

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCS03-XXXXX

Product Introduction Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions...

Contact Now

2.54mm (0.1") 2 Rows Box Header Connector DIP Straight 180° H=9.9mm

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS08-XXXXX

Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides. effect: According to the requirements, the peripheral dimensions of the box header...

Contact Now

1.27*2.54mm 2 Rows Male/Pin Ejector Header Connector DIP/THT 90° Right Angle

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now