Angle Box Header

2.00mm(.079") Pitch Shrouded PCB Box Header through-hole/THT 90° H=6.40

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHCR02-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon

• Min. Order: 1000 Piece/Pieces
• Model No.: HPCNR-FXXXX

Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

2.54mm Ejector Header 90° w Metal Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR03-XXXXXX

Connector Catogory: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to...

Contact Now

1.27mm(.050") Box Header Dual Row DIP 90°/Right Angle H=5.70

• Min. Order: 1 Piece/Pieces
• Model No.: BHAR01-XXXX

Connector Category: Box Header丨1.27mm Box Header丨 2.0mm Box Header丨 2.54mm Box Header 1.27mm Box Header 90° H=5.70 Current Rating: 1Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn...

Contact Now

1.27mm dual Row Box Header 90° H=5.4mm

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: HAR03-XXXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

2.54mm Dual Row Shrouded Box Header DIP 180° type H=13.60mm

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDS03-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

2.54mm(.100") Pitch Dual Row Box/Shrouded Headers DIP 90° type H=9.0

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDR01-XXXXX

Box Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box...

Contact Now

1.27mm(.050") Pitch Dual Latch Ejector Header 90° DIP type

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHAR01-XXXXX

Product Overview: Ejector headers are usually made of head shaped plastic and square needles similar to animal cattle. The difference of the ejector connector is that the simple ejector has more clips on both sides. According to the requirements, the external dimensions of the ejector connector commonly include 1.27...

Contact Now

1.27*2.54mm 2 Rows Male/Pin Ejector Header Connector DIP/THT 90° Right Angle

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now

0.8mm Pin Header Dual Row Angle SMT

• Packaging: Tray/Reel/Bag
• Min. Order: 500 Piece/Pieces
• Model No.: PHAR02-XXD

0.8 mm Male Pin Header Dual Row Angle SMT Type PHAR02-XXD 0.8mm(0.03") Pitch Dual Row right angle pin header SMT Type SPECIFICATIONS: Product Name 0.8mm Pin Header, R/A, 2 Row, SMT 0.80mm Pin Header Dual Row SMT connector 0.80mm Pin Header, double row, SMT,Horizontal PCB Header Connector Product Category: Board to...

Contact Now