90d Pin Header

2.54mm (0.1") 2xXP DIP 90D Right Angle Male Pin Header Connector

• Min. Order: 1 Piece/Pieces
• Model No.: PHER04-XXD

Product Overview: Board-to-Board (BTB) Connectors Board-to-Board Headers & Receptacles PCB Mount Header,PCB Mount Receptacle This type of device is engineered to provide signal connections between two printed circuit boards (PCBs). Our board-level interconnects are manufactured to give you more performance in the...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

PH2.54mm (.100") Single Row Double Plastic Right Angle DIP 90° Pin Header PCB Connector

• Min. Order: 1 Piece/Pieces
• Model No.: PHER02-XXS

PH2.54mm (.100") Single Row Double Plastic Right Angle DIP/Through Hole 90° Pin Header PCB Connector SPECIFICATION Connector Category: Board to Board Connectors丨PC Board Connectors丨Pin Header丨0.8mm Pin Header丨1.0mm Pin Header丨1.27mm Pin Header丨1.5mm Pin Header丨20.mm Pin Header丨2.2mm Pin Header丨2.54mm Pin Header丨3.0mm...

Contact Now

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

160 Positions Straight type E Solder Male

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XXXX-504

Product introduction The connector conforms tot he DIN 41612 standard - DIN is the Deutsches Institut für Normung i.e. the German Institute for Standardisation. In view of the popularity of the connector and its worldwide usage, the standard has been adopted by other bodies and may be referred to as IEC 60603-2 and EN...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.00mm (0.079") Pitch Female Pin Header Connector Single Row Straight Prevent Tin

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: FHDS03-XXSXXX

2.00mm (0.079”) Pitch Female Pin Header Connector Single Row Straight Prevent Tin Product specification Connector Category: Female Header丨0.8mm Female Header丨1.0mm Female Header丨1.27mm Female Header丨1.5mm Female Header丨20.mm Female Header丨2.2mm Female Header丨2.54mm Female Header丨3.0mm Female Header丨3.96mm Female...

Contact Now

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: BHAR01-XXXX

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand...

Contact Now

1.50mm(0.059") Pitch Single Row DIP 180°/Straight Male Pin Strip Headers

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Supply Ability: 100000000pcs/month
• Min. Order: 1000 Piece/Pieces
• Model No.: PHJS01-XXSXXXX

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

1.50mm(0.059") Pitch Pin Header Straight Type Double Row

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: PHJS01-XXDXXXX

Pin Header Product Introduction What is Pin Header Connector? A pin header connector is a male (plug) connector with square pins which are molded into a plastic insulator. Most often manufactured with single or dual rows, pin headers are also available with 3 rows or more. Pin header connectors are typically mated...

Contact Now

2.54mm (0.1") dual row Pin (Male) Box Header SMT with Post

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHDM04-XXXXX

• The simple box header consists of square plastic socket and square needles arranged orderly. The difference • between the connector and the simple box header is that the simple box header will remove the snapshot packets on both sides. • According to the requirements, the peripheral dimensions of small connectors...

Contact Now

1.27*2.54mm 2 Rows Male/Pin Ejector Header Connector DIP/THT 90° Right Angle

• Packaging: tape & reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: LHBR01-XXXXXX

Ejector header The ejector header has two ears like the horn (long ear and short ear), so people call it the horn connector, which is a very simple internal wiring device. Classification of horn connector: according to the spacing of PIN pins, it can be divided into 1.27MM pitch horn connector, 2.0MM pitch horn...

Contact Now