2 54mm

48Pin Half C Press-Fit Eurocard DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFS-XX-XXX-313

Product introduction During its installation, positioning accuracy, installation firmness, and replaceability are crucial.The positioning accuracy can ensure that the connector is accurately connected when the circuit board is loaded into the chassis; the installation firmness is used to ensure that the connector does...

Contact Now

2.54mm DIP 90 Degree Type Ejector Header

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR01-XXXXXX

Product specification Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT or PA6T+30%GF UL 94V-0 10P-18P Without...

Contact Now

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

2.54mm Ejector Header 90° w Metal Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR03-XXXXXX

Connector Catogory: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to...

Contact Now

2.54mm(0.100") Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch

• Min. Order: 1 Piece/Pieces
• Model No.: LHDR04-XXXX

Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ...

Contact Now

2.54mm 40P Ejector Header 90° with Plastic Latch

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR06-XXXXX

Product Introuction: Ejector Header has two ox horn-like ear buttons (long ears and short ears), so people call this connector Ejector Header, which is a very simple internal wiring device to use. Classification of Ejector Header: according to the spacing of PIN pins, Ejector Header with spacing of 1.27MM, Ejector...

Contact Now

2.54mm Dual-in-Line IC Socket Connector SMT (H=3.0 L=4.2)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFEM01-XXXX

Connector Category:IC SOCKET & Machined SOCKET丨Machined Pin Header丨 Machined Female Header丨 IC SOCKET丨Pin Grid Array Sockets丨丨PLCC SOCKET丨 2.54mm Dual-in-Line IC Socket Connector SMT (H=3.0 L=4.2) Product specification Current Rating: 1.0Amp Contact Resistance: 10MΩ max Dielectric Strength: Min 1000 V...

Contact Now

2.54mm Dual-in-Line (DIP/DIL)Chip IC Socket SMT (H=3.0 L=7.4)

• Packaging: Tray, Bag, Tube and Tape Reel ...
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFEM02-XXXX

DIL Sockets Overview DIL sockets (dual in-line sockets) are integrated circuit components used in almost all modern electronic devices. They have two parallel rows of pins set in a rectangular housing. The sockets have different numbers of pins to match the target integrated circuit. DIL sockets are embedded in a...

Contact Now

2.54mm Dual-in-line Right Angle DIP/DIL Socket Connectors

• Packaging: Tray, Tube, Bag and Tape Reel
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFER01-XXXXX

DIL Sockets Overview DIL sockets (dual in-line sockets) are integrated circuit components used in almost all modern electronic devices. They have two parallel rows of pins set in a rectangular housing. The sockets have different numbers of pins to match the target integrated circuit. DIL sockets are embedded in a...

Contact Now

2.54mm Pitch Vertical Through Hole Turned Pin IC Dip Socket Dual-in-line Socket Straight DIP(H=3.0)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: MIFES02-XXXX

DIL Sockets Overview DIL sockets (dual in-line sockets) are integrated circuit components used in almost all modern electronic devices. They have two parallel rows of pins set in a rectangular housing. The sockets have different numbers of pins to match the target integrated circuit. DIL sockets are embedded in a...

Contact Now

2.54mm Dual-in-line Integrated Circuit (IC) Sockets Connector Straight DIP(H=3 L=7.4)

• Model No.: MIFES03-XXXX

Connector Category:IC SOCKET & Machined SOCKET丨Machined Pin Header丨 Machined Female Header丨 IC SOCKET丨Pin Grid Array Sockets丨丨PLCC SOCKET丨 2.54mm Dual-in-line Socket Straight DIP(H=3 L=7.4) The function of the IC socket is to facilitate the insertion of the IC card. A multi pin integrated circuit is called an IC....

Contact Now

1.27mmx2.54mm IDC Flat Cable Connector DIP Plug Connector (terminated height 5.1)

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDBS01-XXXXX

IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation,...

Contact Now