2 54mm Male Headers

Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMR-XX-XXX-213-F

DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...

Contact Now

128 Pin Vertical Male Type C Eurocard DIN41612 Connectors

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-508

Product introduction The connectors have contacts arranged in rows, typically one two or three, with two and three being the most common. These rows are labelled, a, b, and c, for example a pin may be numbered 21a, or 22b, etc., dependent upon the position and the row. Typically the rows have 16 or 32 contacts per row...

Contact Now

DIN41612 Type 0.33Q Connectors-Inversed 10 Positions

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DFR-XX-XXX-222

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

DIN 41612 / IEC 60603-2 Connectors Vertical Plug Inversed 16P

• Packaging: bag
• Supply Ability: 1,000,000PCS/month
• Min. Order: 1000 Piece/Pieces
• Model No.: DMS-XX-XXX-219

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination...

Contact Now

1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon

• Min. Order: 1000 Piece/Pieces
• Model No.: HPCNR-FXXXX

Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact...

Contact Now

2.54mm Ejector/Latch Header Connectors 90° Double Layer

• Packaging: Tray, Bag, Tube U, Tube+CAP R,...
• Min. Order: 1000 Piece/Pieces
• Model No.: LHDR02 -XXXXXXX

2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand...

Contact Now

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)

• Packaging: Tray, Bag, Tube, Tape Reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: BHAR01-XXXX

1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand...

Contact Now

1.27mm IDC Flat Cable Header DIP plug Connector(terminated height 7.0)

• Packaging: tray, bag, tube, tape reel pac...
• Min. Order: 1000 Piece/Pieces
• Model No.: FDAS02-XXXX

IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation,...

Contact Now

1.27mm(.050") Pitch Dual Row Box Header 180° H=4.90

• Packaging: Tray, Bag, Tube, Tube+CAP, Tap...
• Supply Ability: 100000000pcs/month
• Min. Order: 100000000 Piece/Pieces
• Model No.: BHAS01-XXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

1.27x 2.54mm Box Header DIP 180 degree type,H=5.4mm

• Packaging: Tape & Reel
• Min. Order: 1000 Piece/Pieces
• Model No.: BHBS01-XXXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

1.27*2.54mm 14P Shrouded Box Header DIP/THR 90° H=5.90

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHBR01-XXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now

1.27*2.54mm Shrounded Box Header Straight SMT H=5.90

• Packaging: Tape & Reel packing
• Min. Order: 1000 Piece/Pieces
• Model No.: BHBM01-XXXXXX

Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...

Contact Now